AS 168315.2人造橡胶的测试方法 硬度计法—标准名称

AS 168315.2 Methods of test for elastomers - Durometer hardness

AS 168315.2人造橡胶的测试方法 硬度计法

AS 168315.2人造橡胶的测试方法 硬度计法—适用范围

Scope：

This method sets out the procedure for determining durometer hardness of elastomeric materials. Procedures are also given for verification of testing equipment. This method uses two types of durometers, Type A and Type D. The Type A durometer is used for measuring elastomeric materials in the normal hardness range (30-90 IRHD) and Type D for elastomeric materials in the high hardness range (above 90 IRHD).

AS 168315.2人造橡胶的测试方法 硬度计法—相关标准

ASTM D2240橡胶特性的标准试验方法.肖氏硬度/Standard Test Method for Rubber Property8212;Durometer Hardness

ISO 48-4硫化橡胶或热塑性橡胶.硬度的测定.第4部分:硬度计法压痕硬度(肖氏硬度)/Rubber, vulcanized or thermoplastic — Determination of hardness — Part 4: Indentation hardness by durometer method (Shore hardness)

GB/T 531.1硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分_邵氏硬度计法(邵尔硬度)/Rubber , vulcanized or thermoplastic— Determination of indentation hardness — Part 1 : Duromerer method (Shore hardness)

GB/T 30308氟橡胶 通用规范和评价方法/Fluoroelastomers—General specification and procedure of evaluation

GB/T 30308

IS K6253-3硫化橡胶或热塑性橡胶硬度测定.第3部分:硬度计法/Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method

JIS k7312热固性聚氨酯弹性体模塑制品的物理试验方法/Physical testing methods for molded products of thermosetting polyurethane elastomers

ISO 868塑料和硬质胶.用硬度计测定针入硬度[肖氏(SHORE)硬度]/Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

GB T 2411塑料和硬橡胶 使用硬度计测定压痕硬度（邵氏硬度）/Plastics and ebonite-Determination of indentation hardness by means of a durometer(shore hardness)

DIN ISO 7619-1硫化橡胶或热塑性橡胶.压痕硬度的测定.第1部分:硬度计法(肖氏硬度) /Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)

AS 168315.2人造橡胶的测试方法 硬度计法/Methods of test for elastomers - Durometer hardness